Skip to content
docsmall
Credits left today

Contact us

For feature suggestions, usage questions, or credit and order issues, email us at the address below.

Send email

Free Online PDF Page Numbering Tool

Number pages from any page with your own label, position, size and colour

Choose up to 10 PDFs, use # for the actual page number, set the counting and display start pages, position, size, opacity and colour, then apply the same settings to every file. Each PDF can be 500 MB, and all processing happens in your browser.

Choose or drop PDFs to numberSelect up to 10 PDFs. The same page number settings are applied to every file.Up to 10 PDFs, 500 MB each; the label is limited to 80 characters. Everything runs locally in your browser.
Price
Free, no account
Processing
In your browser, no upload
Input
Up to 10 PDFs, 500 MB each
Output
Numbered PDFs, optional ZIP

One set of numbering settings is applied to every selected PDF. The tool draws a small page-number image on each page you choose; it does not rebuild, recompress or rasterize the page, so the original text stays readable and searchable.

  • Use # once or several times in the label: “Page #”, “No.#” and “第 # 页” all work.
  • Separate counting from display to leave a cover unnumbered while the body still starts at Page 1.
  • Keep the label short and pick one of nine positions so the number stays clear of headers, footers and binding.

How to add page numbers to a PDF

Set the label and starting page once, then number every page of up to 10 PDFs.

  1. Add PDFs

    Click the upload area or drop files onto it: up to 10 PDFs at 500 MB each. Page counts are read in the browser, and encrypted or damaged files are rejected before processing.

  2. Set the numbering

    Type a label with # where the number should go, choose the page that becomes Page 1, and optionally delay the first visible number. Then pick one of nine positions and set the text size, opacity and colour.

  3. Add numbers and download

    Choose Add page numbers. Each file previews its first numbered page; after processing, download files one by one or pack two or more results into a ZIP.

Page numbering for PDF files

How the label, counting start and display start interact, where the number sits on the page, and what the output does and does not change.

What does PDF page numbering do?

A page number is a small label drawn on each page so readers can refer to a page, check a printout or follow a table of contents. In a PDF it is usually an overlay object placed near an edge of the page.

This tool adds one page-number image to each page from your starting point. It does not flatten the page, replace the original text or rewrite the page content, so the document keeps its existing text layer, images and page size.

If your material is still a stack of JPG or PNG images, combine it into one PDF with Image to PDF first, then number the result.

  • Numbering is visual guidance, not a table of contents or a bookmark structure.
  • A page number added this way is an image, so it is not selectable or searchable text.
  • Keep the original file; the output is a new, separate PDF.

How does the # page-number placeholder work?

The label is free text with one required character: #. Every # is replaced by the actual page number, so “Page #”, “No.#”, “第 # 页” and “Seite # von #” all produce a number. The label can be up to 80 characters.

Only Arabic numerals are produced (1, 2, 3…). Roman numerals, letters and words such as “one” are not generated, because the tool substitutes the page index rather than converting the number. If you need “Page # of 12”, type the total yourself; it stays fixed on every page.

The label is rendered with fonts available to the browser and then embedded as an image, so Chinese, Japanese, Korean, Arabic, Cyrillic and other scripts work. Exact glyph shapes depend on the device, so keep the label to two to four words for a clean result.

  • Include # or the Add page numbers button stays disabled.
  • A label without a number, such as “Confidential”, is not page numbering; use PDF watermark instead.
  • Long labels at large sizes can exceed the usable page area; the position falls back to the centre and may be clipped.

What is the difference between counting start and display start?

Two inputs control where numbering begins. Count from page sets which physical page becomes number 1: the page number is the physical page minus the count start plus 1. Show from page only controls whether the number is painted. A page is numbered only when it is at or after both values.

The default is 1 and 1, which numbers every page continuously. For a report with an unnumbered cover, set count from page 2 and show from page 1: the cover stays blank and the first body page prints Page 1. To count a title page and contents but not print their numbers, set count from page 1 and show from page 3: page 3 prints Page 3.

If the count start is larger than the file's page count, that file fails with a page-count error instead of producing an empty or partial document. Both values apply to the whole batch, not to individual pages.

  • Count start changes the number printed; show start changes only visibility.
  • A cover can be skipped without reordering or deleting pages.
  • Set show start later than count start when front matter should count toward body numbering but stay unnumbered.

Where can the page number go?

The number can sit in nine fixed positions: top, middle or bottom on the left, centre or right. The default is bottom centre. The label's bounding box is aligned to the chosen edge with a 36 pt margin (half an inch), so a footer number does not touch the trim edge.

A page's own rotation is compensated so the number appears upright. A landscape page gets its number near the landscape edge, not along the unrotated coordinate system.

If the label is wider or taller than the available area after the margin is applied — for example a long string at 144 pt — the position falls back to the page centre. At that point the label may still overflow and be clipped, so shorten it or reduce the size.

  • Bottom centre suits reports and contracts whose footer is already clear.
  • Top right is a common choice for drafts; top centre works well for forms.
  • Avoid positions that already hold a logo, barcode or page footer.

How do size, opacity and colour work?

Text size ranges from 8 to 144 pt, with 12 pt as the default. One point is 1/72 inch, so 12 pt is about 4.2 mm tall and 72 pt is about one inch. On A4 pages, 9–12 pt reads as a footer; 18–24 pt reads as a deliberate design element.

Opacity ranges from 5% to 100% and defaults to 100%, because page numbers are meant to be read rather than blended into the page. Lower values can help when the footer is dark or busy, but check a printed sample before committing.

The colour defaults to black (#000000) and applies to the whole label, including any prefix or suffix. The preview and the export use the same font, colour, padding and position, so what you see on the first numbered page is what the other pages receive.

  • The font is not user-selectable; the label uses the page font stack and falls back to system fonts for missing glyphs.
  • Very light colours disappear on white paper and in grayscale printing; keep contrast in mind.
  • Labels are rasterized at up to 4× before embedding, so normal sizes stay sharp when zoomed.

Does numbering reduce PDF quality or break search?

Page content is copied into the output and is not recompressed or rasterized. The number is a new transparent PNG object on each page, so the original text layer, images and page size stay intact.

The file grows slightly because each numbered page carries one more image. The increase is small for ordinary labels (roughly 1–2 KB per page in current samples) but scales with page count and label size. If the result is too large to email, Compress PDF afterwards.

The source PDF remains unchanged. The output is a new, unencrypted PDF; password-protected sources must be unlocked before processing. Adding an object changes the document, so an existing digital signature no longer validates the edited copy.

  • The page-number image is not selectable text and does not appear in the text layer or search results.
  • Very old or strict PDF readers may render transparency differently; check one sample when exact colour matters.
  • Merging numbered files later keeps the numbers as they were drawn; it does not renumber across documents.

Where are my PDFs processed?

The PDFs stay in the current browser tab. Reading page counts, rendering the preview, drawing the labels and writing the output all happen on the page; files are never uploaded to docsmall or any conversion service.

Closing or refreshing the page discards the queue and results. Nothing is stored after the tab is closed, so an interrupted batch has to be run again.

Downloads are created locally, and the browser chooses where to save them.

  • No account, email address or installation is required.
  • After the static assets load, the same tab keeps working even offline.
  • Results are not stored on a server, so they cannot be retrieved on another device.

What this tool does not do

The tool applies one label and one set of positions to every selected file. It cannot use different text on odd and even pages, restart numbering per section, or add “Page X of Y” automatically. It also does not create PDF bookmarks or a linked table of contents.

It does not reorder, delete, rotate or split pages. To prepare a document first, use Extract PDF pages, PDF split, Merge PDF or Rotate PDF; to turn pages into images, use PDF to image.

A scanned PDF with no text layer is fine for numbering, because the number is drawn as an image. A scan that is physically sideways without a rotation flag stays sideways; rotate it first so the number is not printed across the content.

  • No OCR, no Word or Excel conversion, and no editing of existing page text.
  • No Roman numerals, no letter suffixes and no automatic total-pages placeholder.
  • A count start beyond the file's length fails that file rather than producing a partial result.

Three numbering setups: continuous, cover-skipped and front matter counted

The count start and show start together decide which pages carry a number and what that number is.

Continuous numbering

Best for
Reports, manuals and contracts with no cover page
What prints
Every page prints 1, 2, 3…
Note
Count 1, show 1; the default

Cover skipped

Best for
Documents whose cover or title page should stay blank
What prints
The cover stays blank; the first body page prints Page 1
Note
Count 2, show 1; no page needs to be deleted

Front matter counted but hidden

Best for
Contents or approval pages that should count toward the body but stay unnumbered
What prints
Page 3 prints Page 3; pages 1–2 stay blank
Note
Count 1, show 3; numbering catches up automatically

Practical tips for clean page numbers

A useful number is easy to find, consistent across the file and cheap to produce.

Decide the count start first

Changing the count start changes every printed number. Settle the cover and front matter, then check the preview before processing a large file.

Keep the label short

“Page #” or just “#” is easier to read at 9–12 pt than a long sentence; 80 characters is the hard limit.

Leave room at the edge

The fixed 36 pt margin keeps the number away from the trim edge, but a footer logo or barcode can still collide; choose another of the nine positions if needed.

Check the first numbered page

The preview shows the first page that will actually print a number, so confirm position, size and colour before committing.

Keep settings consistent across a batch

The same label applies to every file. For a multi-volume set whose numbering restarts, process each volume as a separate batch.

Keep the original file

The output is a new file and the source is untouched. If a signature or exact metadata matters, archive the original alongside the result.

Frequently asked questions

How do I add page numbers to a PDF?
Add up to 10 PDFs, type a label containing #, choose the count start and display start pages, and set position, size, opacity and colour. Then choose Add page numbers. Each file is processed locally, and you can download files one by one or pack two or more results into a ZIP.
Is the tool free? Do I need an account?
It is free and needs no account, email address or installation. There is no paid entry point, no hidden download limit and no minimum file count.
Are my PDFs uploaded to a server?
No. Reading page counts, rendering the preview, drawing the labels and writing the output all happen in the current tab. Files never leave your device and are discarded when you close or refresh the page.
Can I add page numbers to several PDFs at once?
Yes. Add up to 10 PDFs at 500 MB each, and the same label and style apply to every file. All finished results can be packed into one ZIP.
What does the # placeholder do?
Every # in the label is replaced by the actual page number. “Page #” becomes “Page 7” on page 7, and “No.#” becomes “No.7”. You can use # more than once; each occurrence receives the same number.
Can I write “Page # of 12” with the total number of pages?
Yes, but you must type the total yourself. The tool only substitutes the current page number, so the total stays fixed on every page and is not recalculated if pages are added or removed later.
What is the difference between count from page and show from page?
Count from page decides which physical page becomes number 1; show from page decides where numbers start appearing. If you count from page 2 and show from page 1, the cover is blank and the first body page prints Page 1. If you count from page 1 and show from page 3, page 3 prints Page 3 and pages 1–2 stay blank.
Can I skip the cover page without deleting it?
Yes. Keep count from page at 1 and set show from page to 2, or set count from page to 2 and show from page to 1 if the body should start at Page 1. The cover remains in the document either way.
Can I use Roman numerals, letters or a custom prefix?
You can type any prefix or suffix, such as “Section #” or “Page # —”, but the generated number is always an Arabic numeral. Roman numerals, letters and spelled-out numbers are not produced automatically.
Can I choose the position, size and colour?
Yes. Choose one of nine positions, set the size from 8 to 144 pt, opacity from 5% to 100%, and any text colour. The default is bottom centre, 12 pt, 100% opacity and black. The font and rotation are not adjustable.
Will numbering reduce quality or make the text unsearchable?
Page content is copied as-is and is not recompressed or rasterized, so the existing text layer stays selectable and searchable. The number itself is a transparent image, so it is not searchable text and adds a small image object per page.
Can I number a password-protected PDF?
No. Encrypted PDFs are rejected while page counts are read. Remove the password with the original password first; the output itself has no password.
What are the output files named, and can I download everything at once?
Each source PDF produces a new file ending in _page_numbers.pdf, with a number appended when names collide inside a ZIP. Once at least two results finish, Download all packs them into pdf-add-page-no_docsmall.com.zip.
Do page numbers work on rotated or scanned pages?
Yes. Page rotation is compensated so the number is upright, and scans without a text layer can still be numbered because the label is drawn as an image. If a scan is physically sideways with no rotation flag, rotate it first with Rotate PDF so the number does not print across the content.